4063-3 Horizontal Steam Condenser/Oil Trap for Tripple Steam Exhaust Manifold Steam Engines Installations.
Steam/oil separator for Saito and other tripple exhaust manifold engine installations.
This product separates the oil from the water in the exhaust system of the engine.
It is a mandatory item in many countries that permit use of steam engine models for hobby use..
Lubrication oil that is essential to prevent wear engine of components during use, is carried to the exhaust with the steam and must be separated for ecological reasons.
The engine exhaust gases pass through this product and gather the excess lubricating oil. It must be removed from time to time.
A 10 ml syringe is supplied with the unit to enable periodical removal of extracted oil through the port shown in the picture.
Inlet and exhaust pipes are a standard 5 mm brass tube and are normally made for “slip on” rubber tube.
This is essentially a passive item in a power assembly.
Cylinder Diameter 50 mm (2”)
Overall Height 65 mm (2.56”)
Length 90 mm (3.5”)
Weight 276 gm
Piping 5 mm for connection with "slip on" rubber hose.
Mounting Flange 63 x 40 mm
|International Freight Prices AU$